QuickServer Gateways

QuickServer Multi-Protocol Gateways for Building Automation

QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.

System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.

The user can preselect two Building Automation System (BAS) drivers (serial, Ethernet and/or LonWorks) to be loaded on the QuickServer at no extra charge. Additional drivers are available at extra cost. Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks®, JCI Metasys® N2 and SNMP. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer. If the user prefers the unit to be pre-configured prior to delivery, FieldServer offers a custom configuration service.

QuickServer Key Features:

• Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
• Multi-configuration capability; specific configurations selectable via DIP switches or software
• DIN rail mount included with gateway
• DIP switches to select baud rate or node ID on the fly
• BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)

Specifications

Field Connections

PS-QS-1X10-XXXX

• Ethernet 10/100 RJ45
• Two Serial RS-485 terminal (up to 115K baud)

PS-QS-1X11-XXXX

• Ethernet 10/100 RJ45
• Serial RS-485 terminal (up to 115K baud)
• FTT-10 LonWorks port

Environment

• Operating temperature: -40°F to 167°F (-40°C to 75°C)
• Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

• 9 to 30 Vdc or Vac or 5 Vdc
• Current draw @ 12V

• PS-QS-BAS-1X10: 150 mA
• PS-QS-BAS-1X11: 279 mA

Other

• Configuration/Diagnostic utilities
• Capacity: 250 or 500 point (depending on gateway)
• Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

• 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
• 0.4 lbs (0.2 Kg)

Approvals

• TUV approved to UL 916 standard
• CE Mark
• BTL Mark (PS-QS-1X10)
• LonMark Certified (PS-QS-1X11)
• RoHS Compliant
• FCC Part 15 Compliant

LonMark Certification on the QuickServer PS-QS-1X11-XXX

• SPID: 80:00:95:46:00:84:04:01
• Profiles:
  • 0000 - Node object (1)
  • 0001 - Open Loop Sensor Oject (5)
  • 0003 - Open Loop Actuator Object (5)

Ordering Information

Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.

Sales and Support: