DeviceNet to Modbus Gateway
1782-JDM
The DeviceNet™ to Modbus interface allows you to integrate serial Modbus slave devices into a Control system through a DeviceNet network. These gateways function as a DeviceNet adapter and support connection to a wide variety of serial Modbus devices through an RS-485, RS-232 or RS-422 port. The gateway is a general-purpose interface that enables exchanges of data between your PAC or PLC and the Modbus slave(s) devices through the DeviceNet scanner. All Modbus slave responses are passed without changing any of the data, which enables these gateways to be used in a wide variety of applications.
Comes with the standard two-year Western Reserve Controls warranty
DeviceNet Features:
- Meets ODVA DeviceNet specification
- Device Profile 12 – Communications Slave Device
- Powered from DeviceNet network
- DIN rail mountable
- Pluggable 5-pin DeviceNet connection
- Address selection via DIP switches
- Autobaud operation
- Supports Polled I/O, Cyclic I/O, Change-of-State, and Explicit Messaging
- EDS file included for configuration
- Standard DeviceNet module and network status LEDs
Modbus Features:
- Choice of isolated RS-485, RS-232 or RS-422 serial interface
- Modbus Master
- Supports Modbus ASCII or RTU
- All Modbus Function Codes are supported
- Forwards the slave response message received without interpretation to the DeviceNet scanner
- All supported Modbus registers in the slave devices are accessible
- Pluggable RS-232 / RS-485 3-pin connection or RS-422 5-pin connection
- Serial port transmit and receive LEDs
Hardware Specifications
|
Specification
|
Description
|
|
Serial Baud Rate Selection
|
Software selectable (1200 through 38.4k baud)
|
|
Cable Connection
|
RS-232, RS-485:3-pin pluggable header (male)
Phoenix Contact MSTBA 2.5/3-G-5.08/AU or equivalent
RS-422:5-pin pluggable header (male)
Phoenix Contact MSTBA 2.5/5-G-5.08/AU or equivalent
DeviceNet:5-pin pluggable header (male)
Phoenix Contact MSTBA 2.5/5-G-5.08/AU or equivalent
Plugs: Phoenix Contact MSTB 2.5/3-ST-5.08/AU and/or MSTB 2.5/5-ST-5.08/AU or equivalents included
|
|
LED Indicators
|
MS Module Status: green/red bi-color
NS Network Status: green/red bi-color
RX: green
TX: green
|
|
Maximum Power
|
Network Isolation: 1000 Vdc
Current: 160 mA @ 11 Vdc to
70 mA @ 25 Vdc Unregulated Power Supply
Power: 1.75 W
|
|
Dimensions
|
Length: 3.54” (90 mm)
Width: .98” (25 mm)
Height: 3.11” (79 mm)
|
|
Operating Temp
|
0 ºC to 60 ºC
|
|
Humidity
|
Up to 95% RH, with no condensation
|
Part Numbers
|
|
1782-JDM-1
|
Isolated RS-232
|
|
1782-JDM-2
|
Isolated RS-485
|
|
1782-JDM-4
|
Isolated RS-422
|
Ordering Information
| 1782-JDM |
DeviceNet to Modbus Gateway |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
