DeviceNet to ASCII Gateway
1782-JDC (E)
The DeviceNet to ASCII interface allows you to connect and integrate ASCII devices into a Control system through a DeviceNet network. These gateways function as a DeviceNet adapter, and support connecting to a wide variety of serial ASCII devices through either the RS232 port or the RS485 port. The gateway is a general-purpose interface that exchanges data between ASCII device(s) and a DeviceNet scanner. This gateway does not interpret the data being exchanged so it may be of any nature or definition. The gateway couples simplicity with cost effectiveness enabling its use in a wide variety of applications. The 1782-JDCE-x offers enhanced (compared to the 1782-JDC-x) parameter options that provide data formatting options for additional control of:
- Serial port receive and transmit data from the ASCII device.
- Gateway send (produce) and receive (consume) data on DeviceNet from the scanner.
Comes with the standard two-year Western Reserve Controls warranty
DeviceNet Features
- ODVA Conformance tested to DeviceNet Specification 2.0
- Gateway is powered from the DeviceNet network
- DIN rail mountable
- Pluggable 5-pin DeviceNet connection
- Communications Device Profile 12 (Chex)
- Address selection via DIP switches
- Autobaud operation
- Supports Polled I/O and Explicit Messaging
- Pluggable RS-485 2-pin connection or RS-232 3 Pin Connection
- 2 standard DeviceNet module and network status LEDs
ASCII Features
- Serial port baud rate up to 38.4k baud
- Software Configurable Parameters
- Supports string lengths up to 124 bytes
- Special mode performs byte swapping of serial messages for PAC/PLC compatibility
- 2 serial transmit and receive LEDs
Hardware Specifications
|
Specification
|
Description
|
|
Baud
Rate Selection
|
Software selectable (1200 through 38.4k baud)
|
|
Cable Connection
|
JDC: 3-pin pluggable header (male)
Phoenix Contact MSTBA 2.5/3-G-5.08/AU or equivalent
Serial Cable: 3-contact plug (female contacts)
Phoenix Contact MSTB 2.5/3-ST-5.08/AU or equivalent (included)
|
|
LED Indicators
|
MS Module Status: green/red bi-color LED
NS Network Status: green/red bi-color LED
RX
TX
|
|
Maximum Power
|
Network Isolation: 1000 Vdc
Current: 160 mA @ 11 Vdc to
70 mA @ 25 Vdc Unregulated Power Supply
Power: 1.75 W
|
|
Dimensions
|
Length: 3.54” (90 mm)
Width: .98” (25 mm)
Height: 3.11” (79 mm)
|
|
Operating Temp
|
0 º C to 70 ºC
|
|
Humidity
|
Up to 95% RH, with no condensation
|
Ordering Information
| 1782-JDC (E) |
DeviceNet to ASCII Gateway |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
1782-JDC-1
|
Isolated RS-232
|
1782-JDC-2
|
Isolated RS-485
|
1782-JDC-4
|
Isolated RS-422
|
|
1782-JDCE-1
|
Isolated RS-232
|
1782-JDCE-2
|
Isolated RS-485
|
1782-JDCE-4
|
Isolated RS-422
|
|
