Modbus Plus SCANport Adapter
1560-MBP
The ProSoft 1560-MBP Modbus Plus Module is designed to allow Modbus Plus based PLCs to interface directly to the Rockwell Automation family of SCANport based devices.
Features and Benefits
The 1560-MBP connects directly to Rockwell Automation SCANport devices, allowing high speed access to the operating status and control parameters, as well as the entire parameter table. Similar devices include the Rockwell Automation Variable Speed Drives (1305 Micro, 1336 Plus, Vector, Force, etc.), the SMC Dialogue Plus and the SMP3.
Accessible Parameters
The 1560-MBP has read/write access to the entire parameter table in a SCANport device. Programmers can access all parameters using the MSTR Type 1 and 2 instructions. In addition, high speed parameter updating can be configured through Global Data in SCANport devices which support Datalinks.
Applications
The 1560-MBP module is simple to use, requiring only the setting of several dip-switch options. The parameters from the Rockwell Automation devices are pre-mapped to simplify reading and writing using standard MSTR commands. Use of Global Data has been optimized to enhance control and status monitoring performance.
Functional Specifications
- Protocol mode: Modbus Plus using Schneider Automation technology
- Supported Modbus Plus operations
- MSTR Type 1 - Write Data
- MSTR Type 2 - Read Data
- MSTR Type 5 - Write Global Data
- MSTR Type 6 - Read Global Data
- Supports Control from Host Global Data. In this mode, the 1560-MBP will look for Control and Reference from the selected Host Global Out Data
- Pre-assigned Modbus memory map
- Read/Write: Command Control and Reference, Datalinks Out: A to D, Up to 2000 parameter values
- Read Only: Status/Feedback, Datalinks In: A to D
- Configuration via dip switches
- Slave Address: 1 to 64
- Host Address: 1 to 64
- Global Database Control Enable
- Fault on Loss of Comm. Enable
- SCANport Messaging Options: No Datalinks, Datalinks A only, Datalinks A and B only, Datalinks A, B, C, D
- Available packages:
- 120 VAC Enclosed
- 24 VDC Enclosed
- Communication port connections- Modbus Plus - Female 9-pin DB
- SCANport - SCANport connector
Ordering Information
| 1560-MBP |
Modbus Plus SCANport Adapter |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
