DNP 3.0 Ethernet Server Communication Module for CompactLogix
MVI69-DNPSNET
The MVI69 DNP 3.0 Server Ethernet Communications Module supports the implementation of the DNP 3.0 (Distributed Network Protocol) over Ethernet, allowing CompactLogix processors to easily communicate with host systems supporting the protocol. The module supports DNP Subset Level 2 features and some Level 3 features.
Features and Benefits
The MVI69-DNPSNET (Distributed Network Protocol Module over Ethernet) allows Rockwell Automation CompactLogix processors to easily communicate with other DNP protocol-compatible devices.
The module supports DNP subset level 2 features and some Level 3 features. The MVI69-DNPSNET module acts as an input/output module between the DNP Ethernet network and the Rockwell Automation backplane. The data transfer from the CompactLogix processor is asynchronous from the actions on the DNP network. Databases are defined in the module to house the data required by the protocol.
Applications
With the growing usage of the DNP protocol over Ethernet technology in the industrial marketplace, this product has a wide variety of application uses. Industries that use this technology include:
- Power and distribution applications
- Petrochemical
- Water and Gas Applications
- SCADA and DCS applications
Functional Specifications
The MVI69-DNPSNET module accepts DNP commands to control and monitor the data stored in the DNP databases. This data is passed between the module and the CompacLogix processor over the backplane for use in user applications.
- DNP databases to house data for the slave port supporting the following maximum input counts
- Binary input: 8000 points (500 words)
- Binary output: 8000 points (500 words)
- Counter: 250 (500 words)
- Analog input: 500 words
- Analog output: 500 words
- Float input: 150 points (300 words)
- Float output: 150 points (300 words)
- Module memory usage that is definable up to maximum point counts
- Data movement between module using block-transfer
- Ethernet port supporting both TCP and UDP over Ethernet
- Supports DNP 3.0 in a level 2 implementation
- Supports sending of input event data from the ladder to the module
- Supports time synchronization from/to processor
- Configurable via text file
- Status and error information
- All data in the DNP slave is contained in user-defined files
- Supports all CompactLogix processors: L20/L30/L31/L32/L35
- Supports MicroLogix 1500 Controller with LRP firmware version 6.0 or newer.
Hardware Specifications
|
Dimensions
|
Standard 1769 Single-slot module
|
|
Current Load
|
800 mA max@ 5 VDC (Serial)
Power supply distance rating of 2 (L43 and L45 installations on first 2 slots of 1769 bus)
|
|
Operating Temp.
|
0 to 60 Deg C
|
|
|
32 to 140 Deg F
|
|
Storage Temp.
|
-40 to 85 Deg C
|
|
|
-40 to 185 Deg F
|
|
Relative Humidity
|
5 to 95% (w/o condensation)
|
|
LED Indicators
|
Power and Module Status
|
|
|
Application Status
|
|
|
CFG Port Activity
|
|
|
Error Status
|
|
CFG Port
|
RJ45 (DB-9M w/ supplied cable)
|
|
|
RS-232 only
|
|
|
No hardware handshaking
|
|
App Port (Ethernet)
|
10/100 MB Ethernet compatible interface
Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration
Electrical Isolation 1500 V rms at 50 Hz to 60 Hz for 60 s, applied as specified in section 5.3.2 of IEC 60950: 1991
|
|
Shipped with Unit
|
RJ45 to DB-9M cables for each port
|
|
|
6-foot RS-232 configuration Cable
|
Ordering Information
|
To order this product, please use the following:
|
MVI69-DNPSNET
|
DNP 3.0 Ethernet Server Communication Module
|
|
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
