IEC60870-5-101 Slave Communication Module
MVI69-101S
The MVI69 IEC 60870-5-101 Slave Communication Module allows Rockwell Automation CompactLogix I/O compatible processors to interface easily with IEC 60870-5-101 protocol compatible hosts. The module's two powerful and highly configurable ports allow the many SCADA host systems supporting the IEC protocol to be integrated into the CompactLogix platform.
Features and Benefits
The MVI69-101S module is the fastest and easiest way to add IEC 60870-5-101 protocol interface support to the CompactLogix platform. It is a single slot, backplane compatible solution for the Rockwell Automation CompactLogix platform. This module has two powerful and highly configurable IEC 60870-5-101 Slave ports, allowing the many SCADA and field devices supporting the IEC protocol to be integrated into the CompactLogix platform.
The MVI69-101S module acts as an input/output module between the IEC 60870-5-101 telecontrol network and the Rockwell Automation CompactLogix backplane. The data transfer from the CompactLogix processor is asynchronous from the actions on the network. A 5000-word register space in the module exchanges data between the processor and the telecontrol network.
Applications
The MVI69-101S Slave module is designed to address the application where a host systems using the IEC 60870-5-101 protocol must communicate with a CompactLogix processor. As such, the IEC Slave module can be used as a gateway in many SCADA installations in industries such as:
- Power and distribution applications
- Petrochemical
- Water and Gas Applications
- Oil and Gas production
Functional Specifications
The MVI69-101S module accepts commands from an attached master unit. A port configured as a virtual slave permits a remote master to interact with all data contained in the module. This data can be derived from the CompactLogix processor. The remote master device uses the fully-configured databases in the module to control outputs and monitor inputs. The module can operate in balanced or unbalanced mode.
- Supports time stamp events
- Supports time and data synchronization from a master or the processor
- Supports monitored data
- Event queue supports 100 points for each data type
- Supports Master Class 1 and Class 2 polls with configurable parameters
- Acknowledgement transmission is handled internally by the module
- Configurable data link address (session) and common ASDU address (sector)
- Configurable pulse duration.
|
Application Serial ports
(P1, P2)
|
|
|
|
Full hardware handshaking control, providing radio, modem, and multi-drop support
|
|
Software configurable communication parameter
|
Baud rate: 110 to 38,400 baud depending on protocol
Parity: None, Odd or Even
Data Bits: 5, 6, 7, or 8
Stop Bits: 1 or 2
RTS On/Off Delay: 0 to 65535 ms
RS-232 handshaking configurable
|
Hardware Specifications
|
Dimensions
|
Standard 1769 Single-slot module
|
|
Current Load
|
800 mA max@ 5 VDC (Serial)
Power supply distance rating of 2 (L43 and L45 installations on first 2 slots of 1769 bus)
|
|
Operating Temp.
|
0 to 60 Deg C
|
|
|
32 to 140 Deg F
|
|
Storage Temp.
|
-40 to 85 Deg C
|
|
|
-40 to 185 Deg F
|
|
Relative Humidity
|
5 - 95% (w/o condensation)
|
|
LED Indicators
|
Power and Module Status
|
|
|
Application Status
|
|
|
Serial Port Activity
|
|
|
Serial Activity and Error Status
|
|
CFG Port
|
RJ45 (DB-9M w/ supplied cable)
|
|
|
RS-232 only
|
|
|
No hardware handshaking
|
|
App Ports (P1, P2)
|
RJ45 (DB-9M w/supplied cable)
|
|
|
RS-232 handshaking configurable
|
|
|
500V Optical isolation from backplane
|
|
Shipped with Unit
|
RJ45 to DB-9M cables for each port
|
|
|
6-foot RS-232 configuration Cable
|
Ordering Information
| MVI69-101S |
IEC60870-5-101 Slave Communication Module |
| |
|
| To place an order, please contact your local ProSoft Technology, Inc. distributor. For a list of ProSoft distributors near you, click here. |
Distributors:
Place your order by email to orders@prosoft-technology.com:, fax to +1 661-716-5101.
Sales and Support:
|
