The MVI69 Application Development Module is a CompactLogix backplane compatible module that allows user-developed 'C' applications to operate on the CompactLogix platform. A great way to speed up custom ASCII data communications or to protect a proprietary algorithm, the ADM is a powerful tool for the CompactLogix platform.
The MVI69 'C' Programmable Application Development Module with Ethernet is a CompactLogix backplane compatible module that allows Rockwell Automation CompactLogix processors to interface with other Ethernet protocol compatible devices and hosts utilizing custom 'C'; code.
The inRAX DF1 Master/Slave Communications module (MVI69-DFCM) is designed to allow CompactLogix processors to easily interface with DF1 protocol-compatible devices and hosts. Many host SCADA packages support the DF1 protocol, while devices commonly supporting the protocol include Rockwell Automation PLCs, power monitoring equipment, as well as severla other third-party devices in the marketplace.
The MVI69 DH485 Communication Module allows Rockwell Automation CompactLogix I/O compatible processors to interface easily with other DH485 protocol compatible devices. Compatible devices include not only Rockwell Automation PLCs (which support the DH485 protocol) but also a wide assortment of end devices
The MVI69 DNP 3.0 Server Ethernet Communications Module supports the implementation of the DNP 3.0 (Distributed Network Protocol) over Ethernet, allowing CompactLogix processors to easily communicate with host systems supporting the protocol. The module supports DNP Subset Level 2 features and some Level 3 features.
The MVI69 DNP 3.0 module is a single slot, backplane compatible DNP 3.0 interface solution for the Rockwell Automation CompactLogix platform. This module provides highly configurable support of both DNP 3.0 Master and Slave implementations (level 2 minimum), allowing the many SCADA and field devices supporting the DNP protocol to be integrated into the powerful CompactLogix platform.
The MVI69-FLN FA Control Network Communication Module is a single slot solution that allows Rockwell Automation CompactLogix / MicroLogix I/O compatible processors to easily interface with other FL-net protocol compatible devices. The module implements FL-net version 2.00 (OPCN-2) defined by JEMA (The Japan Electrical Manufacturers Association) for the standard FA control network. FL-net is a master-less system.The MVI69-FLN module acts as a gateway between the FL-net network and the CompactLogix / MicroLogix backplane. The data transfer from the CompactLogix / MicroLogix processor is asynchronous from the actions on the FL-net network. The module's internal database can be used to exchange Area 1 and Area 2 cyclic, network, and module status data between the processor and the FL-net network.
The MVI Liquid & Gas Flow Computer Module is a CompactLogix backplane compatible module that allows CompactLogix processors to easily support flow applications with 8 meter runs performing measurement of hydrocarbon gases or liquids using AGA 3, 7, 8 and API MPMS Chapters 11 and 12 measurement standards.
The Ethernet Global Data (EGD) module can be used to interface many different protocols with EGD devices. The EGD driver supports both the producer/consumer service port (18246) and the command service port (7937) using the UDP protocol over an IP network. The user defines the data to be produced and consumed in a configuration file downloaded to the module.
The inRAx Generic ASCII Ethernet Interface module is designed to allow CompactLogix and MicroLogix processors to interface easily with ASCII devices using the TCP/IP protocol and the CompactLogix or MicroLogix processor. Compatible devices may be either ASCII instruments with Ethernet built-in or Ethernet connection via a thin server to the existing ASCII device
The ProSoft Technology MVI69 Generic ASCII Serial module is a fast and easy way to add two fully configurable ASCII communication ports to the CompactLogix platform without consuming the front port of the processor.
The MVI69 HART Multidrop Master Communication Module is a CompactLogix backplane-compatible module that allows CompactLogix processors to interface easily with HART compatible devices. Devices commonly supporting the protocol include pressure, temperature, flow transmitters, as well as other similar instruments commonly found in the process (and other) industry.HART® is a registered trademark of the HART Communication Foundation.
The MVI69 IEC 60870-5-103 Master Communication Module allows Rockwell Automation CompactLogix I/O compatible processors to interface easily with IEC 60870-5-103 master (controlled unit) protection devices. Devices commonly supporting the protocol include relays, breakers, sub-station Communication Modules and other serial communication devices used in power monitoring.
The MVI69 IEC 60870-5-104 Server Communication Module allows Rockwell Automation CompactLogix backplane I/O compatible processors to interface easily with IEC 60870-5-104 protocol-compatible hosts.
The MVI69 IEC 60870-5-101 Slave Communication Module allows Rockwell Automation CompactLogix I/O compatible processors to interface easily with IEC 60870-5-101 protocol compatible hosts. The module's two powerful and highly configurable ports allow the many SCADA host systems supporting the IEC protocol to be integrated into the CompactLogix platform.
The In-Chassis Wireless Communication Module creates a powerful wireless connection between devices located remotely, and the CompactLogix processor. The efficient but powerful PWP protocol allows data exchange in one-to-one or one-to-many wireless scenarios.
The MVI69 Johnson Controls N2 Communication Module allows Rockwell Automation CompactLogix I/O compatible processors to interface easily with other Johnson Controls N2 master devices.
MVI69-MCM Interactive Tour
The MVI69 Modbus Communication Module allows Rockwell Automation CompactLogix processors to interface easily with other Modbus protocol compatible devices.Compatible devices include not only Modicon PLCs (which all support the Modbus protocol) but also a wide assortment of end devices. The module acts as an input/output module between the Modbus network and the Rockwell Automation backplane. The data transfer from the processor is asynchronous from the actions on the Modbus network. A 5000-word register space in the module exchanges data between the processor and the Modbus network.
The MVI69 Modbus TCP/IP Client Communication Module is designed to allow CompactLogix and MicroLogix processors to interface easily with other Modbus TCP/IP protocol-compatible devices.Compatible devices include not only Modicon processors (which support the Modbus TCP/IP protocol) but also a wide assortment of other server devices.
The inRAx Modbus TCP/IP Communication Module is designed to allow CompactLogix processors to interface easily with other Modbus TCP/IP protocol-compatible devices.Compatible devices include not only Modicon processors (which support the Modbus TCP/IP protocol) but also a wide assortment of other clients and server devices.
The MVI69 PROFIBUS DP-V0 Slave Communication Module allows CompactLogix I/O compatible processors to interface easily with a PROFIBUS DP Master device.
The PROFIBUS DP-V1 Master module is a powerful communication interface for CompactLogix I/O compatible processors. The module incorporates proprietary backplane technology that enables powerful data exchange with CompactLogix I/O compatible processors.The MVI69-PDPMV1 is now equipped with CIPconnect, a feature that enables remote configuraiton and diagnostics of the module via EtherNet/IP. CIPconnect techhnology utilizes the backplane bridging capabilities of the CompactLogix system to enable EtherNet/IP connectivity between a PC and the MVI69-PDPMV1 module using the Ethernet port of a CompactLogix processor, like the L32E or L35E. CIPconnect also enables asset management software that supports FDT/DTM to connect to PROFIBUS DP devices through the same Ethernet connection.
The PS69 PROFIBUS DP Master module expands the functionality of Rockwell Automation's CompactLogix family of processors to include PROFIBUS. This module supports both I/O control and messaging, thus integrating DP-V0 and DP-V1 functionality into CompactLogix. The PS69-DPM is a CompactLogix I/O compatible, PROFIBUS certified module, which enables controllers to communicate with a PROFIBUS network. The configuration and diagnostic of the PROFIBUS system is done via the serial diagnostic interface of the module using the System Configuration tool PROSOFT.fdt. The data exchange between controller and module is done via the I/O process data image using CompactLogix / MicroLogix backplane technology.
The PS69-DPS module expands the functionality of Rockwell Automation's CompactLogix to include PROFIBUS DP-V0 and DP-V1 capability. The PS69-DPS is a more cost-effective option offering more features than the MVI69-PDPS, and supports both I/O control and messaging. Explicit ladder logic CIP message blocks provide slave status diagnostic data and acyclic messaging. The PS69-DPS interface appears to the CompactLogix controller as a standard I/O module allowing it to be configured via RSLogix 5000, or configuration can be transferred from the Master to the PS69-DPS. For third-party configuration, a GSD file is supplied. The slave interface provides a diagnostic interface and has rotary switches for setting of the bus address. Complete program examples for simple and quick start-up are available.Each module is equipped with LEDs to display communication and device status.
The MVI69-S3964R module from ProSoft Technology allows point-to-point communication between a CompactLogix or MicroLogix controller and a partner with 3964R (with or without RK512) communication capability.